SAAB WIS ONLINE

Front Side Door Window Upper Reveal Molding Replacement

Front Side Door Window Upper Reveal Molding Replacement



Callout Component Name
Refer to Glass and Sheet Metal Handling Warning

Preliminary Procedures

1. Remove the outside rearview mirror. Refer to Outside Rearview Mirror Replacement .

2. Remove the front side door window garnish molding. Refer to Front Side Door Window Garnish Molding Replacement .

3. Remove the front side door window frame rear applique. Refer to Front Side Door Window Frame Rear Applique Replacement .


1 Front Side Door Window Upper Reveal Molding Rivets (Qty: 8)

Procedure

1. Lower the window to the fully down position.

2. Lower the run channel weatherstrip, by grasping both upper inner corners and pull downward to expose the rivets. Do Not remove it from the door.

3. When drilling cover/protect the interior trim and door from the metal shavings.

4. The rivets are located in the inner upper door frame.

5. Use a suitable tool, drill out the rivets from around the upper door frame.


2 Front Side Door Upper and Lower Reveal Molding Retainers (Qty: 2)
3 Front Side Door Window Upper Reveal Molding

Procedure

Using a suitable tool, install the rivets in the upper door frame.
Note

After drilling out the rivets check the door and the upper door frame for loose rivets ends. This will prevent rattles.