Outside Rearview Mirror Glass Replacement
|
|
Outside Rearview Mirror Glass Replacement
|
|
Callout
|
Component Name
|
|
1
|
Outside Rearview Mirror Glass Retainers (Qty :7)
Refer to
Glass and Sheet Metal Handling Warning
.
Procedure
|
1.
|
Apply several layers of masking tape to the top of the outside rearview mirror housing in order to protect the painted finish.
Push the mirror glass (2) inward at the top of the mirror glass until full travel is reached.
|
|
2.
|
Grasp the bottom of the mirror face back and firmly pull it rearward away from the mirror motor and housing.
It will be necessary to use a sharp jerking motion to release it from the motor.
|
|
3.
|
Disconnect electrical connectors from mirror, if equipped.
|
|
|
2
|
Outside Rearview Mirror Glass
Procedure
|
1.
|
Align the mirror glass retainers with the retaining tabs (1) on the actuator.
|
|
2.
|
Using a 9 cm (3 in) rubber sanding block placed in the center of the mirror glass, apply pressure until an audible click is heard.
|
|
3.
|
Inspect the power mirror for proper operation.
|
|
