SAAB WIS ONLINE

Rear Side Door Window Upper Reveal Molding Replacement

Rear Side Door Window Upper Reveal Molding Replacement



Callout Component Name
Refer to Glass and Sheet Metal Handling Warning

Preliminary Procedures

1. Remove the rear side door window . Refer to Rear Side Door Window Replacement .

2. Remove the rear side door front window frame applique. Rear Side Door Window Frame Front Applique Replacement .

3. Remove the rear side door rear window frame applique. Rear Side Door Window Frame Rear Applique Replacement .


1 Rear Side Door Window Upper Reveal Molding Rivets (Qty: 4)

Procedure

1. Lower the run channel weatherstrip, by grasping both upper inner corners and pull downward to expose the rivets. Do Not remove it from the door.

2. When drilling cover/protect the interior trim and door from the metal shavings.

3. The rivets are located in the inner upper door frame.

4. Use a suitable tool, drill out the rivets from around the upper door frame.


2 Rear Side Door Window Upper Reveal Molding Retainers (Qty: 2)
3 Rear Side Door Window Upper Reveal Molding

Procedure

Using a suitable tool, install the rivets in the upper door frame.
Note

After drilling out the rivets check the door and the upper door frame for loose rivets ends. This will prevent rattles.