SAAB WIS ONLINE

Rear Side Door Window Weatherstrip Replacement

Rear Side Door Window Weatherstrip Replacement



Callout Component Name

Preliminary Procedures

1. Remove the rear side door trim panel. Refer to Rear Side Door Trim Replacement

2. Remove the rear side door window inner sealing strip. Refer to Rear Side Door Window Inner Sealing Strip Replacement .

3. Remove the rear side door window garnish molding. Refer to Rear Side Door Window Garnish Molding Replacement

4. Remove the rear side door window . Refer to Rear Side Door Window Replacement .


1 Rear Side Door Window Weatherstrip Front Fasteners (Qty: 2) Refer to Fastener Caution .

Procedure

Remove the water deflector.

Tighten

10 Nm (89 lb in)
2 Rear Side Door Window Weatherstrip Rear Fasteners (Qty: 2)

Tighten

10 Nm (89 lb in)
3 Rear Side Door Window Weatherstrip

Procedure

1. Starting in the upper corner of the door frame, pull the weatherstrip out of the window frame.

2. Center the weatherstrip in door frame. Work the weatherstrip towards the corners of the door frame.

3. Operate the window to ensure that the window seal properly into the inner door frame.