SAAB WIS ONLINE

Windshield Side Reveal Molding Replacement

Windshield Side Reveal Molding Replacement



Callout Component Name
1 Windshield Side Reveal Molding Screws to Pillar (Qty: 5) Refer to Fastener Caution .

Procedure

1. Open the front side door to the full open position.

2. Using a suitable tool, remove the side pillar retainers.


Note

It may be necessary to push down on the weatherstrip to expose the retainers.


2 Windshield Side Reveal Molding Upper Retainer Clips to Pillar (Qty: 5)

Procedure

1. Grasp the windshield reveal molding, rock the molding from side to side while pulling upward releasing the retainers from under the pillar molding to pillar.

2. Clean the double face tape from the molding and windshields and replace as needed. Refer to Emblem/Nameplate Replacement .


Note

Do Not push or pry on the windshield to release the reveal molding from the pillar.


3 Windshield Side Reveal Molding