SAAB WIS ONLINE

Windshield Garnish Molding Replacement

Windshield Garnish Molding Replacement


Callout Component Name
1 Windshield Garnish Molding Assembly

Procedure

1. Starting at the top, gently pull on the garnish molding to disengage the clip.

2. Tab must be installed prior to retainer clip.

3. Tab to be fully seated in instrument panel trim panel retainer and valance panel.

4. Disconnect the electrical connector.

5. Transfer all necessary components.

6. The tether clip at the upper portion of the garnish molding MUST be replaced every time the windshield garnish molding is removed.