Seat Belt Does Not Retract

/ 9-4x / 2011 / 8. Body / Seat belt system / Fault diagnosis, fault symptoms / Seat Belt Does Not Retract

1.	Grab the seat belt webbing and slowly and firmly extract 15-25 mm (5/8-1 in) of webbing from the seat belt.

2.	Release the seat belt and allow the webbing to slowly retract back into the retractor.

3.	Check to see if the seat belt is released. If the seat belt is not released, repeat steps 1 and 2, two times more.

4.	If the retractor does not release after repeating the steps, replace with a new retractor.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.