SAAB WIS ONLINE

Driver or Passenger Seat Back Cushion Finish Panel Replacement (with UWG)

Driver or Passenger Seat Back Cushion Finish Panel Replacement (with UWG)



Callout Component Name

Preliminary Procedures

Remove the driver or passenger video display. Refer to Video Display Replacement .
1 Front Seat Back Cushion Finish Panel Screw (Qty: 2) Refer to Fastener Caution .

Procedure

Detach the seat back cushion cover bottom two bungie clips from the crossbar.
Note

Pull the seat back cushion cover bottom back to gain access to the panel screws that attach the panel to the lumbar support bracket.


Tighten

4 Nm(35 lb in)
2 Front Seat Back Cushion Finish Panel

Procedure

1. Pull the panel downward first to disengage the upper retainers.

2. Move the finish panel and side clips to one side to disengage the panel from the seat frame.