SAAB WIS ONLINE

Rear Seat Cushion Frame Replacement (60 Percent Seat)

Rear Seat Cushion Frame Replacement (60 Percent Seat)



Callout Component Name

Preliminary Procedures

1. Remove the rear seat. Refer to Rear Seat Replacement .

2. Remove the rear seat center belt retractor anchor bolt. Refer to Rear Seat Center Belt Replacement .

3. Remove the rear seat back cushion center panel. Refer to Rear Seat Back Cushion Center Panel Replacement .

4. Remove the rear seat cushion cover and pad. Refer to Rear Seat Cushion Cover and Pad Replacement (40 Percent Seat) Rear Seat Cushion Cover and Pad Replacement (60 Percent Seat) .


1 Rear Seat Back Cushion Frame Fastener (Qty: 2) Refer to Fastener Caution .

Tighten

21 Nm (15 lb ft)
2 Rear Seat Recliner Fastener (Qty: 4)

Tighten

21 Nm (15 lb ft)

Procedure

1. Disengage the hog rings and j-channel retainers from the seat back cushion frame.

2. Pull the cover away from the pad to gain access to the recliner fasteners.


3 Rear Seat Cushion Frame

Procedure

1. Disconnect the electrical connector.

2. Transfer components as necessary.


Note

Note the routing of the electrical harness for installation.