SAAB WIS ONLINE

Sunroof Window Seal Replacement - Outer

Sunroof Window Seal Replacement - Outer



Callout Component Name

Preliminary Procedures

1. Remove both sunroof windows. Refer to Sunroof Window Replacement - Front

and Sunroof Window Replacement - Rear .

2. It is only necessary to lower the headliner. Only do those steps in the headliner replacement procedure that will lower the headliner enough to gain access to the part. Refer to Headlining Trim Panel Replacement (With C3U) Headlining Trim Panel Replacement (Without C3U) .

3. Remove the sunroof frame assembly. Refer to Sunroof Frame Replacement .


1 Sunroof Window Seal

Procedure

1. Start at one end of the seal, pulling up and away from the module.

2. Remove all traces of old sealer, clean around the edge of the inside surface of the module with a 50/50 mixture of isopropyl alcohol and water by volume on a dampened lint-free cloth.

3. Water test the vehicle before installing the headlinder.