SAAB WIS ONLINE

Applying paint protector

Applying paint protector

Acrylate Latex

Paint protector: Part number 30 02 516.

Water-based Acrylate Latex containing solvent.

Apply the liquid by means of an airless low-pressure spray gun or paint sprayer.

Spray a covering layer without any surplus on all vertical surfaces.

Important

Apply the paint protector without any surplus (5-10 µm dry coat). A thick coat will make it extremely difficult to remove the paint protector.


Drying time: Apply a couple of drops of water to the paint protector. If it turns white, the car must be left to dry somewhat longer before it is driven out to the storage area.

Do not apply paint protector in the rain or in direct sunlight.

Directions

Warning

Wear suitable protective equipment, such as a respirator, gloves, goggles and boots. Make sure the area is well ventilated.


First aid

Inhalation:

Take the person out into the fresh air and give respiratory aid if necessary.

Do not give the person anything to drink!

Call for a doctor. Splashes in eyes:

Hold the eyelids open and rinse with clean water for at least 10 minutes. Skin contact:

Take off contaminated clothing. Wash the affected skin area thoroughly with soap and clean water.

Do not use solvents! Swallowed liquid:

Lay the person down in a position of rest. Call a doctor.

Do not provoke vomiting!

Summary of materials

Protective wax for the engine bay. Part number: 30 15 914, 300 ml spray container.

Paint protector. Part number: 30 02 516. Quantity: 10 litres.