Check oil level, leaks, top up as necessary
Check oil level, leaks, top up as necessary |
Top up with oil to the MAX mark on the dipstick. The distance between the MAX and MIN marks corresponds to 1 litre (1.05 qts).
Oil type
See Lubricant .Fluid level, automatic transmission |
Apply the handbrake. Start the engine and run it at idling speed. Select D and wait at least 15 seconds. Then select R and wait another 15 seconds. Repeat in position P.
Check the fluid level (engine running at idling speed and selector lever in P). Top up as necessary.
Important | ||
The dipstick has two sets of level marks, one set for hot oil and one for cold oil. The amount of fluid between the maximum and minimum marks is about 0.4 litres (0.4 qts). |
||
Oil type:
See LubricantFluid level, power steering |
Check the level and top up as necessary. If the fluid level is low, investigate the cause.