Engine oil and oil filter
Engine oil and oil filter |
Check for oil leakage |
Check that no oil leakage occurs at the top or bottom of the engine and gearbox or in the power steering's hydraulic system.
If there is an oil leak on the auxiliary side of the engine, it is recommended that the drive belt is inspected and replaced if necessary.
Engine oil |
Change oil.
Oil capacity
B205E, B235E: 4.0 litres (4.3 qts) including filterB308E: 4.5 litres (4.8 qts) including filter
Oil type
See LubricantDrain plug, tightening torque:
B205E, B235E, B308E: 25 Nm (19 lbf ft)
Oil filter |
1. |
Loosen the oil filter with the filter wrench and unscrew it. Clean the sealing surface on the engine.
|
2. |
Oil in the rubber gasket on the new oil filter and fit it.
Tightening torque: 10 Nm (7.4 lbf ft). |
3. |
Start the engine and check the filter for leaks.
|