SAAB WIS ONLINE

Engine oil and oil filter

Engine oil and oil filter


Check for oil leakage

Check for oil leakage on the top or underside of the motor/gearbox or steering hydraulic system.

If there is an oil leak on the auxiliary side of the engine, checking the drive belt and possible replacement of the drive belt is recommended.

Engine oil


Change the oil.

Oil amount

B205E, B235E: 4.0 litre (4.3 qt) including filter

B308E: 4.5 litre (4.8 qt) including filter

Oil type

See Lubricants

Drain plug, tightening torque:

B205E, B235E, B308E: 25 Nm (19 lbf ft)




Oil filter



1. Loosen the oil filter with the filter wrench and unscrew the filter. Wipe the surface sealing on the motor clean.

2. Lightly oil the rubber gasket on the oil filter and install it.

Tightening torque: 10 Nm (7.4 lbf ft)

3. Check for oil leakage from the filter after the engine is started.