Fluid level checks, leaks and topping up
Fluid level checks, leaks and topping up |
Top up with oil to the MAX mark on the dipstick. The distance between the MAX and MIN marks corresponds to 1 litre (1.05 qts).
Fluid type
See Lubricants .Fluid level, automatic transmission |
Apply the handbrake. Start the engine and run it at idling speed. Select D and wait at least 15 seconds. Then select R and wait another 15 seconds. Repeat in position P.
Check the fluid level (engine running at idling speed and selector lever in P). Top up as necessary.
Important | ||
The dipstick has two sets of level marks. The amount of fluid between the maximum and minimum marks is about 0.4 litres (0.4 qts). |
||
Fluid type:
See LubricantsFluid level, power steering |
Check the fluid level and top up as necessary. If there is insufficient fluid, investigate the cause.