Drive belt for auxiliaries, to fit
| Drive belt for auxiliaries, to fit |
| 1. |
Fit the multigroove belt.
|
|
| 2. |
Fit the right-hand engine attachment with bracket and engine mount.
Tightening torque: To body 63 Nm (46.5 lbf ft) |
|
| 3. |
Fit the power steering hose in the holder
|
|
| 4. |
Fit the mass air flow sensor with hose.
|
|
| 5. |
Raise the car.
|
|
| 6. |
Lower the engine by carefully removing the wedges.
|
|
| 7. |
Fit the lower spoiler sections.
|
|
| 8. |
Lower the car and remove the wing protectors.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
