Evaporative emission canister

/ 9-5 (9600) / 1998 / 2. Engine / Exhaust emission control system / Adjustment/replacement / Evaporative emission canister

To remove

1.	Raise the car.

2.	Remove the right-hand front wheel.

3.	Remove the wing liner from the wheel housing. Press in the plastic liner and bend it down to remove it.

4.	Remove the evaporative emission canister by unhooking it from its mounting.

5.	Mark and remove the two connected hoses.

6.	Change the filter.

To fit

Fit in reverse order.

Tightening torque:

Wheel: 120 Nm (88.5 lbf ft)

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.