SAAB WIS ONLINE

Oxygen sensor, V6

Oxygen sensor, V6

To remove

Important

The cables must not be twisted. Twisted cables exposed to vibration can break.

The oxygen sensor is sensitive to impacts and jolting and must be handled with care.



1. Unplug the oxygen sensor connector.


2. Raise the car.

3. Snip the cable tie securing the oxygen sensor cable. Note the way the cable is run and lower the cable. Remove the oxygen sensor.



To fit


Important

The cables must not be twisted. Twisted cables exposed to vibration can break.

The oxygen sensor is sensitive to impacts and jolting and must be handled with care.




Note

Coat the oxygen sensor threads sparingly with Molycote 1000, part no. 30 20 971.



1. Fit the oxygen sensor.

Tightening torque: 55 Nm (40.5 lbf ft).

2. Carefully thread the cable back to the oxygen sensor connector. Secure the oxygen sensor cable with a cable tie.

3. Lower the car to the floor and plug in the oxygen sensor connector.