SAAB WIS ONLINE

Fuel pump relay

Fuel pump relay

To remove


1. Remove the pedal arrangement cover by undoing the 3 screws and the clip. Tilt down the cover and carefully pull it out. Pay attention to the cables for the data link connector and the lighting.


2. Undo the screw on the relay box.


3. Tilt down the relay board.

4. Carefully open the relay catch and remove the relay.



To fit


1. Spray the contacts on the relay board with Kontakt 61 (part no. 30 04 520) and fit the relay.


2. Lift up the relay board so that the lid closes.


3. Tighten the screw on the relay box.

4. Reposition the cables to the data link connector and the lighting. Position the pedal arrangement cover and tighten the 3 screws and the clip.