Mass air flow sensor
| Mass air flow sensor |
| To remove |
| 1. |
Unplug the connector.
|
|
| 2. |
Loosen the hose clamps on the connecting hoses.
|
|
| 3. |
Remove the mass air flow sensor.
|
|
| To fit |
| Important | ||
|
The mass air flow sensor is fitted with the arrows in the direction of flow of the intake air. |
||
| 1. |
Put the mass air flow sensor in place.
|
|
| 2. |
Tighten the hose clamps on the connecting hoses.
|
|
| 3. |
Spray the connector with Kontakt 61 (part no. 30 04 520) and plug it in.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
