Resetting triggered limp-home mechanism
|
|
Resetting triggered limp-home mechanism
|
|
1.
|
Remove the upper engine cover.
|
|
3.
|
Attach female connector for throttle.
|
|
5.
|
Clear diagnostic trouble codes.
|
|
6.
|
Turn the ignition OFF.
|
|
7.
|
Carefully slide the end of the spring towards the throttle body using the point of a pen or similar.
|
|
8.
|
At the same time, rotate the black tooth disc anticlockwise with a screwdriver. A click will be heard in its end position.
|
|
9.
|
Turn the pedal arm with throttle cable clockwise. Make sure that the throttle arm does not follow the movement of the pedal arm. Refer to the illustration of a reset throttle.
|
|
10.
|
Fit the upper engine cover.
|
