P0113
Read the instructions below then start the fault diagnostic procedure.
Symptom: CHECK ENGINE comes on after two driving cycles.
P0113 |
Fault symptoms
CHECK ENGINE comes on after two driving cycles.Conditions
The following conditions apply for this DTC:• |
Engine running and the voltage is higher than 4.664 V for more than 5 seconds.
|
Diagnostic help
Fault diagnosis concerns electrical faults in connected leads or in the sensor.Diagnostic tool functions related to this fault are:
• |
Temperature sensor reading, in °C.
|
See also the description of test values under ”Fault diagnosis, general” for more information.
Check the wiring
Note | ||
Jiggle the leads and in-line connectors at various points and in different directions to detect any intermittent breaks or short circuits in the wiring. Observe the multimeter, test lamp or diagnostic tool while doing this. |