Mass air flow sensor
| Mass air flow sensor |
| To remove |
| 1. |
Unplug the connector.
|
|
| 2. |
Loosen the hose clips on the connecting hoses.
|
|
| 3. |
Remove the mass air flow sensor.
|
|
| To fit |
| Important | ||
|
Fit the mass air flow sensor in the direction of intake air flow as indicated by the arrows. |
||
| 1. |
Put the mass air flow sensor in place.
|
|
| 2. |
Tighten the clamps on the connecting hoses.
|
|
| 3. |
Spray the connector with Kontakt 61 contact cleaner (part no. 30 04 520). Plug in the connector.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
