P1261
Read the instructions below then
start the fault diagnostic procedure.
Symptom: CHECK ENGINE lights up straight away.
Throttle control in limp-home mode.
Fuel shut-off
Main relay inoperative.
Throttle Binding.
Fault symptoms
|
•
|
CHECK ENGINE lights up straight away.
|
|
•
|
Throttle control in limp-home mode.
|
|
•
|
Main relay inoperative.
|
Conditions
The following conditions apply for this DTC:
|
•
|
Engine running and throttle control is already in limp-home mode due to another DTC.
|
|
•
|
Mass air flow per combustion is greater than requested.
|
Diagnostic help
A mechanical fault is preventing the throttle from closing. P1251 and P1264 have been generated and throttle control is in limp-home mode. The throttle has been open since then, in spite of the driver having released the accelerator.
Warning
|
|
The car must not be driven until the fault has been rectified.
|
|
|
|
|
|
Check the wiring
|
Note
|
|
Jiggle the leads and in-line connectors at various points and in different directions to detect any intermittent breaks or short circuits in the wiring. Observe the multimeter, test lamp or diagnostic tool while doing this.
|
See
.
