P1263
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Fuel shut-off
Throttle moved manually when engine was running. NOTE. May set if Mechanism is not Reset
Fault symptoms
Conditions
The following conditions apply for this DTC:
|
•
|
Engine running and been running for at least 5 seconds.
|
|
•
|
Throttle motor is receiving 100% PWM in closing direction.
|
Diagnostic help
The DTC does not indicate a fault; it is merely an information code. Avoid moving the throttle arm. If you want to increase engine rpm while servicing the engine, move the pedal arm instead.
Check the wiring
|
Note
|
|
Jiggle the leads and in-line connectors at various points and in different directions to detect any intermittent breaks or short circuits in the wiring. Observe the multimeter, test lamp or diagnostic tool while doing this.
|
