Aerial cable, radio

/ 9-5 (9600) / 1998 / 3. Electrical System / Audio System / Adjustment/replacement / Aerial cable, radio

To fit

Do not remove the existing aerial cable without fitting a new one.

1.	Remove the sill covers and cable conduit cover on the right-hand side (front and rear doors). Lower the seat cushion and backrest.

2.	Remove the speaker grille from the right-hand side of the parcel shelf.

3.	Remove the trim on the right-hand C pillar to gain access to the aerial amplifier.

4.	Undo the nut securing the luggage compartment trim. Fold the right-hand section to one side.

5.	Detach the aerial cable from the aerial amplifier.

6.	Cut the aerial cable (the loose part).

7.	Connect the new aerial cable to the aerial amplifier.

8.	Place the aerial cable in the cable conduit on the right-hand door side. (Attach with a cable tie to prevent rattling.)

9.	Fold up the carpet on the right-hand side and pass the cable under the carpet.

10.	Remove the main unit (radio) and radio compartment.

11.	Push the cable up towards the rear of the compartment.

12.	Detach the old aerial cable and cut off the loose part.

13.	Connect the new aerial cable.

14.	Secure with cable ties to prevent rattling.

15.	Refit the removed components.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.