SAAB WIS ONLINE

P1901

Read the instructions below then start the fault diagnostic procedure.

Symptom: No bus communication with DICE.

P1901


No Bus Data From DICE. See Fault Tracing 3:5 Bus and Diagnostic Communication.





Fault symptoms

No bus communication with DICE.

Condition

The following conditions are applicable:

Trionic:


Engine has started

No communication for 10 seconds


Diagnostic help

Some of the following symptoms can perhaps be observed:


- Diagnostic trouble code P1921 or P1902 in the TCM.

- Additional diagnostic trouble codes in the Trionic (P1902, P1923 or P1908).

- A/C not working.

- Radiator fan runs continuously or not at all (coolant may boil).

- Radio does not work.

- Engine fails to start.

- Direction indicators do not work.

- Interior lighting does not work.

- Intermittent wiper operation does not work.




Checking the wiring harness

Jiggle the wiring harness at several points and in different directions to detect intermittent breaks and short-circuits in the leads. Observe the multimeter, test lamp or diagnostic tool during the test.