Rear light fitting in bootlid

Rear light fitting in bootlid

To remove

1.	(RH side) Remove the handle.

2.	Remove the trim on the side in question.

3.	Undo the lamp holder.

4.	(RH side) Loosen the lock arm and remove the lock with gasket.

5.	Unscrew the lamp retaining nuts.

To fit

1.	Fit the lamp and its retaining nuts.

2.	(RH side) Fit the lock with gasket and the lock arm.

3.	Fit the lamp holder.

4.	(RH side) Fit the handle.

5.	Fit the trim.

Replacement of lamp bulb

1.	(RH side) Remove the handle.

2.	Remove the trim on the side in question.

3.	Undo the lamp holder.

4.	Remove and change bulb.

5.	Fit the bulb holder.

6.	(RH side) Fit the handle.

7.	Fit the trim.