SAAB WIS ONLINE

B2371

Read the instructions below then start the fault diagnostic procedure.

Symptom: Steering wheel switch faulty.

B2371


Steering wheel controls. Open circuit/Faulty.


Fault symptoms

Steering wheel switch faulty.

Condition

Open circuit: resistance in the circuit higher than 8 kohm.

Diagnostic help

The steering wheel controls can be read using Tech 2.

The buttons (7 resistors connected in series) are supplied with +5 V from the SID unit. When a button is pressed, the resistor concerned is grounded and this produces the relevant voltage.

Check the wiring harness

Jiggle the wiring harness at several points and in different directions to detect intermittent breaks and short-circuits in the leads. Observe the multimeter, test lamp or diagnostics instrument during the test.