Function
|
Alternative
|
Description
|
Market
|
Recall Service Message
|
|
The “Time for service” message is shown 20 times on the display whenever it is time for a service.
After service, the message should be deleted. This can be done either by a command or by holding down the CLEAR button for 8 seconds.
After adjustment, the SID display flashes to acknowledge the adjustment.
|
|
Outdoor Temperature
|
-5°C - +5°C
|
The outside temperature display can be altered +/- 5°C. The SID unit reads the value from the sensor and presents this on the display. If the display is incorrect, it can be adjusted (changed) using this command.
After adjustment, the SID display flashes to acknowledge the adjustment.
|
|
Daycounter
|
ON
OFF
|
The counter shows how many days remain to service. The day counter can be turned off using this command so that service indication is given only with the number of kilometres. Normally this is the distance travelled in km or 365 days.
After adjustment, the SID display flashes to acknowledge the adjustment.
|
|
