CHECK messages
The SID unit display can be used by all connected systems to show CHECK messages. When the ignition is turned ON, “CHECKING” appears for approx. 4 seconds. Then a CHECK message is shown if active.
The following message is shown direct (without a 4 second delay):
If a CHECK message is initiated, an acoustic signal is heard, the INFO DISPL lamp in the main instrument unit lights and a message is shown. If the message is preceded by a + sign, more than one message has been activated.
CHECK messages are shown in the following order of priority:
|
2.
|
TRANSMISSION OVERHEATING
|
|
8.
|
WASHER FLUID LEVEL LOW
|
WASHER FLUID LEVEL LOW is shown after a 70 second delay and COOLANT LEVEL LOW is shown after a 30 second delay (not when ignition ON “CHECKING”).
The driver acknowledges a message by pressing any button except NIGHT PANEL. If more than one message is activated, the next message is acknowledged in the same way. When a message has been acknowledged, it is not shown again. If the messages are not acknowledged, they are deleted from the display automatically at the rate of one message per minute.
TEST BRAKE LIGHTS cannot be acknowledged as above, but disappears only when the brake pedal is pressed.
