Replacing the starter motor, 4-cylinder engine
|
|
Replacing the starter motor, 4-cylinder engine
|
|
1.
|
Remove the cover on the battery and the shield on the intake manifold.
|
|
2.
|
Disconnect the negative battery cable.
|
|
3.
|
Remove the starter motor's upper retaining bolt (18 mm).
|
|
4.
|
Disconnect the starter motor connecting cables.
|
|
6.
|
Cut the strap around the solenoid.
|
|
7.
|
Unscrew the starter motor's lower retaining nut.
|
|
8.
|
Lower the starter motor and lift it out.
|
|
1.
|
Clean the starter motor mounting surfaces and electrical contacts and apply Vaseline.
|
|
2.
|
Screw on the starter motor's retaining nut.
|
|
5.
|
Clean the starter motor connecting cables, apply Vaseline and reconnect them.
|
|
6.
|
Screw on the starter motor's upper retaining bolt.
|
|
7.
|
Reconnect the negative cable to the battery.
|
|
8.
|
Fit the cover and shield.
|
