Function
|
Alternatives
|
Description
|
Market
|
Anti-Theft Alarm
Installation
|
Without alarm
Glass breakage
Glass breakage and Angle tilt sensor
|
This must be programmed when fitting or modifying the anti-theft alarm.
|
|
Soundlevel at arm/disarm
|
LOW
HIGH
|
The sound level of the siren can be set LOW/HIGH when arming/disarming the alarm. This function does not affect the sound level of the siren when the alarm is activated.
|
|
Number of beeps at arming
|
0-7 beeps
|
The number of times that you want the siren to beep when arming the alarm. This is preset according to law to “0” for markets EU and GB.
|
|
Number of beeps at disarming
|
0-7 beeps
|
The number of times that you want the siren to beep when disarming the alarm. This is preset according to law to “0” for markets EU and GB.
|
|
Number of beeps when opening trunk
|
0-7 beeps
|
The number of times that you want the siren to beep when opening the tailgate. This is preset according to law to “0” for markets EU and GB.
|
|
Disarming at low battery voltage
|
No
YES
|
When this function is programmed to “Yes”, the alarm will be disarmed if the voltage drops below 7 Volts.
|
|
Sound Activation Time
|
0-520 s
|
The time for which the siren will sound when the alarm is tripped.
|
|
Flashers Activation Time
|
0-520 s
|
The time for which the direction indicators will flash when the alarm is tripped.
|
|
Self Arming
|
No
YES
|
When this is set to “Yes”, the car will self-arm itself after the self arming time.
|
|
Selfarming Time
|
0-2040 s
|
The time before the car self-arms itself.
|
|
