SAAB WIS ONLINE

Disconnecting the glass breakage sensor

Disconnecting the glass breakage sensor




To avoid false alarms, e.g. if (a child or) an animal is left in the car, the glass breakage sensor can be disconnected.

Disconnection

The sensor is disconnected (with the key removed from the ignition) by holding down the NIGHT PANEL button for a few seconds. The angle sensor is also disconnected.

The disconnection is confirmed by the text DOOR ALARM ONLY appearing on the SID unit display. The car must then be locked within 3 minutes for the disconnection to apply when the alarm is armed.

Connection

The disconnection is cancelled the next time the car is unlocked or when NIGHT PANEL is pressed again. The SID unit display then shows FULL THEFT ALARM.

Important

If a fault occurs in the glass breakage sensor, the CHECK message SERVICE THEFT ALARM appears on the SID display.