Receiver for remote control
|
|
Receiver for remote control
|
The remote control receiver has an integral loop antenna and is available with three frequencies: 433.92 MHz and 315 Hz. It is located between the front seats at the back of the centre console and is supplied from +30 via fuse 9 and connected to the TWICE control module on the following pins:
Ground
|
pin no. 13
|
Signal
|
pin no.14
|
The integral antenna receives the transmitted code signal from the remote control. The signal is processed and sent on to TWICE, which is programmed to identify the car's remote controls. If the correct signal is received, the command is carried out.
