Remote control, battery
| Remote control, battery |
| General |
The remote control is powered by a 3V lithium battery (CR 2032) and in normal use the battery will last for around 3 years. The battery should be changed when the range falls.
For safety reasons, we recommend changing the battery once a year.
| Battery warning (low voltage) |
When the voltage of the battery in the remote control is low, a battery warning is activated. When the warning is detected 10 times in succession, a CHECK message is sent out to the bus. The SID unit reads the message and displays CHANGE BATTERY IN REMOTE CONTROL on the SID display to draw the driver's attention to the battery condition.
| Important | ||
|
When the battery is changed or if the vehicle power supply has been disconnected, the remote control code must be synchronised with TWICE by pressing one of the buttons on the remote control 4 times in succession. |
||
|
Synchronisation is confirmed when the central locking is activated. |
||
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
