Control module
| Control module |
| General |
The control module in the TWICE system is located under the left-hand front seat. It is connected to the components used in the system by a 70-pin connector.
The task of the control module, as a central unit, is to monitor and control the components and functions in the system, as follows:
| • |
TWICE - controls the power supply to the various functions in the system. Power is supplied direct via the module and via external relays which are grounded through the module.
|
|
| • |
TWICE - is connected to the instrument bus (I-bus) and thus receives, processes, and sends out information (communicates) via the bus with other car systems (control modules) connected to the bus.
|
|
| • |
TWICE - in the event of a fault, stores the diagnostic trouble codes (DTC) which can be read using the diagnostic instrument (Tech 2).
|
|
| • |
TWICE - is programmable. Certain functions can be programmed to meet legal requirements, market demands, customer preferences, and car equipment.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
