Upper fluid delivery pipe (4-cyl)
|
|
Upper fluid delivery pipe (4-cyl)
|
|
2.
|
Place an oil pan under the transmission to collect fluid spill.
|
|
3.
|
Remove the upper banjo bolt, plug the hole.
|
|
4.
|
Lower the car to the floor.
|
|
5.
|
Remove the upper banjo bolt from the radiator.
|
|
6.
|
Remove the pipes' bracket from the fan cowling.
|
|
7.
|
Remove the screws securing the fan cowling to the radiator.
|
|
8.
|
Raise the fan cowling slightly and lift out the delivery pipe.
|
|
Note
|
|
Change the seals in the banjo bolts.
|
|
1.
|
Raise the fan cowling slightly. Position the pipe correctly.
|
|
2.
|
Fit the banjo bolt but do not tighten it.
|
|
3.
|
Fit the bracket on the fan cowling and tighten it.
Tighten the banjo bolt.
Tightening torque: 27 Nm (20 lbf ft)
|
|
5.
|
Fit the banjo bolt on the transmission and tighten it.
Tightening torque: 24 Nm (18 lbf ft)
|
|
6.
|
Lower the car to the floor.
|
|
7.
|
Fill with transmission fluid, Texaco Texamatic DEXRON III (7045 EU, TL1863 US), to the correct level.
|
