Checking hydraulic pressure
|
|
Checking hydraulic pressure
|
|
1.
|
Remove the test plug from the transmission casing and connect an oil pressure gauge.
|
|
2.
|
Put chocks under all 4 wheels.
|
|
3.
|
Apply the handbrake fully.
|
|
4.
|
Press the brake pedal down hard.
|
|
5.
|
Start the engine and check the idling speed (825 rpm).
|
|
6.
|
Move the selector lever to position D and check the system pressure as indicated in the table.
Outlet
|
Idle
|
Stalling speed
|
C1
|
3.0-4.0 bar
|
9.5-12.5 bar
|
C2
|
0 bar
|
0 bar
|
|
|
7.
|
Move the selector lever to position R and check the system pressure as indicated in the table.
Outlet
|
Idle
|
Stalling speed
|
C1
|
0 bar
|
0 bar
|
C2
|
6-7 bar
|
16-18 bar
|
|
