Delivery pipe
| Delivery pipe |
| To remove |
| 1. |
(LHD) Lift up the central electric unit in the engine bay.
|
|
| 2. |
(LHD) Lift up the Maxi fuse holder.
|
|
| 3. |
(LHD) Remove the bracket for the central electric unit and move it to one side.
|
|
| 4. |
Draw the brake fluid from the reservoir. Empty the delivery pipe by connecting
88 19 096 Bleeding equipment
and sucking out the brake fluid through the bleed nipple.
|
|
| 5. |
Undo the clip securing the delivery pipe to the master cylinder.
|
|
| 6. |
Pull the delivery pipe from the master cylinder. Fit the clip.
|
|
| 7. |
Remove the clip securing the delivery pipe to the slave cylinder.
|
|
| 8. |
Remove the delivery pipe.
|
|
| To fit |
| 1. |
Make sure that the clips are fitted.
|
|
| 2. |
Place the delivery pipe in position and connect it to the slave cylinder and master cylinder.
|
|
| 3. |
Press the pipe into the plastic clip.
|
|
| 4. |
Top up the brake fluid and bleed the system as described under
.
|
|
| 5. |
Check that the connections are sealed.
|
|
| 6. |
(LHD) Fit the bracket.
|
|
| 7. |
(LHD) Fit the Maxi fuse holder.
|
|
| 8. |
(LHD) Fit the central electric unit.
|
|
| 9. |
Test the clutch.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
