Wheel sensor, front right
|
|
Wheel sensor, front right
|
|
1.
|
Depress the locking tab on the connector and remove it from the holder.
|
|
3.
|
Raise the car and remove the wheel.
|
|
4.
|
Clean the area round the wheel sensor using a soft wire brush.
|
|
5.
|
Remove the grommet and withdraw the lead.
|
|
6.
|
Detach the lead from the clips and lift out the sensor.
|
|
1.
|
Fit the wheel sensor in its holder and tighten the retaining bolt.
|
|
3.
|
Push the lead into the clips and fit the grommet.
|
|
4.
|
Fit the wheel, see
Wheels
, and lower the car.
Tightening torques
aluminium wheel 110 Nm (81 lbf ft)
steel wheel 50 Nm +2x90°, max. 110 Nm (37 lbf ft +2x90°, max. 81 lbf ft)
|
|
5.
|
Plug in the connector
|
|
6.
|
Plug the connector into the holder.
|
