Brake fluid reservoir, LHD and RHD
|
|
Brake fluid reservoir, LHD and RHD
|
|
1.
|
Unplug the connector from the level sensor and (LHD) bend aside the main fuse box.
|
|
2.
|
Empty the brake fluid reservoir, using the brake system bleeder unit (part No. 88 19 096).
|
|
3.
|
Place some paper or a cloth under the master cylinder.
|
|
4.
|
(manual) Disconnect the hose from the clutch.
|
|
5.
|
Fit the filler cap back on the reservoir and pull the reservoir straight up.
|
|
1.
|
(manual) When fitting a replacement brake fluid reservoir on a car equipped with a manual gearbox, cut off the top of the reservoir's hose connection.
|
|
2.
|
Press the reservoir into the master cylinder.
|
|
3.
|
(manual) Connect the hose to the clutch.
|
|
5.
|
Plug in the level sensor's connector and return the main fuse box to its original position.
|
|
6.
|
Fill up with brake fluid.
|
|
7.
|
Check the system for leakage.
|
