Handbrake system
| Handbrake system |
When the handbrake lever is pulled up, the force will be transferred via the cable equalizer and two cables to the levers (2) on the handbrake unit located inside the rear wheel brake drums.
The actuating levers (2) press the brake shoes (1) against the brake drums so that braking is achieved.
To compensate for brake lining and brake drum wear, an adjusting unit (3) is provided which is accessible from the outside through a hole in the brake drum.
When the handbrake is applied, the handbrake lever switch closes a circuit to ground and the handbrake warning lamp in the main instrument display panel lights up. When the handbrake lever is released, the return spring acts on the actuating lever and the brake shoes return to the rest (brakes off) position.
For adjustment of the handbrake, see
and
.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
