ABS warning lamp does not come on

Read the instructions below then start the fault diagnostic procedure.

Symptom: A lamp test is performed when the ignition is switched on. The ABS warning lamp should come on for about 3 seconds. The ABS warning lamp does not come on.

ABS warning lamp does not come on

Fault symptoms

A lamp test is performed when the ignition is switched on. The ABS warning lamp should come on for about 3 seconds. The ABS warning lamp does not come on.

Conditions

Fault in the circuit between TC/ABS control module pin 21 and the warning lamp in the main instrument unit.

Diagnostic help

The ABS warning lamp can be activated with the diagnostic tool.

-	Select “Activate”

-	Select “ABS lamp”