TCS lamp does not come on

Read the instructions below then start the fault diagnostic procedure.

Symptom: A lamp test is performed when the ignition is switched on. The TCS lamp should come on for about 3 seconds. The TCS lamp does not come on.

TCS lamp does not come on

Fault symptoms

A lamp test is performed when the ignition is switched on. The TCS lamp should come on for about 3 seconds. The TCS lamp does not come on.

Conditions

Fault in the circuit between TC/ABS control module pin 28 and main instrument unit pin 13 (K20).

Diagnostic help

The TCS lamp can be activated with the diagnostic tool.

-	Select “Activate”

-	Select “TCS Lamp”