SAAB WIS ONLINE

Ball joint, upper transverse link

Ball joint, upper transverse link

To remove



1. Raise the car and remove the rear wheel.

2. Detach the transverse link from the longitudinal link and place a spacer between the upper and the lower transverse link.

3. Press out the ball joint with 89 96 761 Press sleeve set, rear axle (KM-906-70, KM-906-61 and KM-906-62).


To fit



1. Press in the ball joint with 89 96 761 Press sleeve set, rear axle (KM-906-70, KM-906-63 and KM-906-64).

2. Tighten the bolt securing the transverse link to the longitudinal link.

Tightening torque 90 Nm +60° (70 lbf ft +60°) .

3. Fit the wheel. See Wheels .

Tightening torques

aluminium rim 110 Nm (81 lbf ft)

pressed steel rim 50 Nm +2x90°, max. 110 Nm (37 lbf ft +2x90°, max. 81 lbf ft)

Lower the car to the floor.