B1332,B1333,B2332, B2333
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Airbag warning lamp on.
B1332
Driver airbag. Open Circuit
B1333
Driver Airbag. Resistance too Low
B2332
Driver Airbag. Short to Ground
B2333
Driver Airbag. Short to B+
Fault symptom
Airbag warning lamp on.
Conditions
The following conditions are applicable to the respective diagnostic trouble codes:
B1332
|
•
|
The resistance measured by the control module is higher than 5.57 ohms for 10 s.
|
|
•
|
The resistance measured by the control module is higher than 225 ohms for 160 ms.
|
|
•
|
Fault diagnosis will not be carried out if diagnostic trouble code B2332 or B2333 has been generated.
|
B1333
|
•
|
The resistance measured by the control module is lower than 2.02 ohms for 20 s.
|
|
•
|
Fault diagnosis will not be carried out if diagnostic trouble code B2332 or B2333 has been generated.
|
B2332
|
•
|
The voltage applied to control module pin 2 is lower than 1.5 V for 1.25 s.
|
B2333
|
•
|
The voltage applied to control module pin 1 is higher than 3.5 V for 1.25 s.
|
