Passenger airbag
| Passenger airbag |
The passenger airbag is offered as a factory-fitted option. It is mounted in the dashboard above the glove box on the passenger side and connected to pins 3 and 4 of the control module.
The cable carries test and detonation current from the SRS control module to the passenger airbag.
The passenger airbag, which has a volume of about 135 litres, incorporates a gas generator. The gas generator is screwed to the airbag casing which is screwed in its turn to the dashboard. The airbag is held in place by a plastic cover with fracture lines. The dashboard has corresponding fracture lines.
| Passenger airbag gas generator |
The gas generator consists of a steel housing, electric detonator, explosive charge and filter.
On receiving an activation command, the control module sends a current pulse to the detonator which ignites the explosive charge. On combustion, this explosive charge generates a gas. The filter cools the gas and removes particles from it before it passes into the airbag.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
