Radiator crossmember
| Radiator crossmember |
| 1. |
Remove the front wing.
|
|
| 2. |
Drill holes into the spot-welds, grind off the welded joints and remove the radiator crossmember.
|
|
| 3. |
Align the radiator crossmember mountings if necessary.
|
|
| Fitting |
| 1. |
Grind clean the surfaces to be welded on the spare part and on the body.
|
|
| 2. |
Drill holes for plug-welding in the spare part.
|
|
| 3. |
Apply welding primer to the surfaces that are to be spot-welded.
|
|
| 4. |
Place the radiator crossmember in position and fix it with some welding clamps. Close the bonnet and adjust the position of the spare part.
|
|
| 5. |
Weld on the radiator crossmember.
|
|
| 6. |
Remove any remaining welding primer. Welding primer reduces adhesion of paint, filler and sealant.
|
|
| 7. |
Apply primer to all bare metal surfaces.
|
|
| 8. |
Seal joints and seams with sealant.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
