SAAB WIS ONLINE

Rear door handle

Rear door handle

To remove


1. Open the door.

2. Remove the cover from around the window frame.

3. Remove the door trim.

4. Remove the water separator.

5. Unscrew the nut and plate from the back of the handle.


6. Remove the three screws holding the lock unit.


7. Lower the lock unit slightly to detach the pushrod from the lock unit.

8. Lift out the handle.


To fit



1. Fit the handle.

2. Fit the plate and screw on the handle with the nuts.

3. Insert the pushrod in the lock unit and position it in the door.


4. Screw on the lock unit.

5. Refit the water separator, door trim and cover around the window frame.